Wednesday, November 20, 2013

DCSE Portable 2013 Q & A

[please send your comments]


Q1: Which Product family is optimal for graphic rendering and complex data analysis?
Ans: Precision

Q2: Which checks should you perform when a faulty processor is suspected?
Ans:Thermal and Beep codes

Q3: What will leaving a power unplugged for 2 minutes accomplish?
Ans:Reset the power supply.

Q4: What should you do before replacing a hard drive?
Ans: Run the hard drive self-test

Q5: A notebook will not boot.The PSA/ePSA indicates that the hard drive pass checks
  Which of these is the most likely explanation.
Ans: Corrupt Operating System
         Hard drive connection not seated correctly
         Missing operating system

Q6: Which key do you press during power-on to access the bios interface?
Ans: <F2>.


Q7: Which of the Following are reasons you might go into the BIOS?
Ans: verify device are connected.
        make adjustments to hardware functionality
        report on computer hardware

Q8: How is the display of a Latitude Notebook connected to the system board?
Ans: LVDS Cable.

Q9: What should you do before starting troubleshooting a problem?

Ans: Check whether the system is in warranty.

Q10: When returing a printed circuit board assembly to dell.which of the following repacking steps should be taken?

Ans: Insert the board into an ESD bag
        Place small parts between upper foam covering and the box lid.

Q11: Working on a Notebook,you remove the system DIMMs and switch power back on.the system does not beep.what can you conclude from this?
 Ans: System Board is bad.

Q12: Which innovation supersedes older BIOS in dell portable and desktop computers?
Ans: UEFI BIOS.

Q13: How is the LVDS  cable secured to the LCD panel connector?


Ans:  Adhesive tape


Q14: When replacing a system board.what happens if you enter an incorrect service tag?
Ans: Replacement fails,and a new system board must be requested.

Q15: Which precaution should you take before removing the batter from an inspiron 5423?
Ans :Ensure that the battery switch is set off before removing the battery.

Q16: In what way does the installation of a 7mm HDD in the precision differ from installation of a 9mm drive?
Ans: The 7mm HDD requires a rubber filler installed to the HDD bracket.

Q17: You need to remove the palm rest from an inspiron notebook.which cables do you need to replace to release from their connectors on the system board?
Ans: Hot key
        TouchPad
        Power

Q18: The replacement for Dell 32-bit diagnostics is:
Ans: ePSA

Q19: What aid is in place to help you ensure that only the correct screws are fastened?
Ans: Color-coded screw-holes.

Q20: How do we run PAID LCD BIST Diagonstic?
Ans: Press and hold down the <D> key.Press the power button.





46 comments:

  1. A few answers listed were incorrect, and the last 5 weren't given.

    5 - Not just Corrupt Memory.
    9 - "Whenever possible, check that the system has the latest BIOS version"
    19 - - NOT "Color-coded screw-holes" or "The holest are embossed (raised."
    20 - - NOT "removed without removing any other part" or "It is secured with a single screw, accessed from the battery bracket."
    21 - NOT on POST, "Enter the system board number on the Dell Support site."
    23 - NOT always, "When a BIOS CD is available."

    24 - Answer is "Remove all memory modules except memory in the 1st slot"

    ReplyDelete
  2. Q1: Which Product family is optimal for graphic rendering and complex data analysis?
    Ans: Precision

    Q2: Which checks should you perform when a faulty processor is suspected?
    Ans: Thermal and Beep codes

    Q3: What will leaving a power unplugged for 2 minutes accomplish?
    Ans: Reset the power supply.

    Q4: What should you do before replacing a hard drive?
    Ans: Run the hard drive self-test

    Q5: A notebook will not boot.The PSA/ePSA indicates that the hard drive pass checks.
    Which of these is the most likely explanation.
    Ans: Corrupt Operating System
    Missing operating system

    Q6: Which key do you press during power-on to access the bios interface?
    Ans: .

    Q7: Which of the Following are reasons you might go into the BIOS?
    Ans: verify device are connected.
    make adjustments to hardware functionality
    report on computer hardware

    Q8: How is the display of a Latitude Notebook connected to the system board?
    Ans: LVDS Cable.

    Q9: What should you do before starting troubleshooting a problem?
    Ans: Whenever possible, check that the system has the latest BIOS version.

    Q10: When returing a printed circuit board assembly to dell.which of the following repacking steps should be taken?
    Ans: Insert the board into an ESD bag
    Place small parts between upper foam covering and the box lid.

    Q11: Working on a Notebook, you remove the system DIMMs and switch power back on.the system does not beep.what can you conclude from this?
    Ans: System Board is bad.

    Q12: Which innovation supersedes older BIOS in dell portable and desktop computers?
    Ans: UEFI BIOS.

    Q13: How is the LVDS cable secured to the LCD panel connector?
    Ans: Adhesive tape

    Q14: When replacing a system board.what happens if you enter an incorrect service tag?
    Ans: Replacement fails,and a new system board must be requested.

    Q15: Which precaution should you take before removing the batter from an inspiron 5423?
    Ans :Ensure that the battery switch is set off before removing the battery.

    Q16: In what way does the installation of a 7mm HDD in the precision differ from installation of a 9mm drive?
    Ans: The 7mm HDD requires a rubber filler installed to the HDD bracket.

    Q17: You need to remove the palm rest from an inspiron notebook.which cables do you need to replace to release from their connectors on the system board?
    Ans: Hot key
    TouchPad
    Power

    Q18: The replacement for Dell 32-bit diagnostics is:
    Ans: ePSA

    Q19: There are over 20 screws securing the keyboard in the XPS Ultrabook. What aid is in place to help you ensure that only the correct screws are fastened?
    Ans: The keyboard bracket

    Q20: What is notable about the keyboard of the Inspiron Z series?
    Ans: A screw, located under the memory mylar, must be removed to remove the keyboard.

    Q21: How do you find the management mode (Intel AMT) number for a system configuration?
    Ans: Check the label on the bottom door.

    Q22: How do we run PAID LCD BIST Diagonstic?
    Ans: Press and hold down the key.Press the power button.

    Q23: A BIOS CD should be used to enter the Service Tag in which of the following instances?
    Ans: Only for systems with came with a BIOS CD

    Q24: To determine if a system has a bad memory DIMM, you should:
    Ans: Remove all memory modules except memory in the 1st slot.

    Q25: Best practices for LCD handling include:
    Ans: Lifting the LCD from left/right sides with both hands

    ReplyDelete
  3. Much love and many kisses :D

    ReplyDelete
  4. Dose anyone have the information for DCSE Foundation 2013 Alienware Certification and DCSE Foundation 2013 Ruggedized Certification .

    ReplyDelete
  5. Your awesome saved me about 4 hours of boring work

    ReplyDelete
  6. These are the answers for Dell Foundation Training for PowerEdge Cloud Servers
    1. C5= microserver
    C8000= hyperscale
    C410x= Infrastructure.

    2.
    c5220
    c5215

    3. What type of sled is the poweredge c8000xd?
    A storage sled_that_provides dedicated data storage to a C8220X or C8220_sled.

    . specify what the dell implementation of openIPMI consists of (2)
    IPMItool,
    PMI_Service

    5. ESD is a major concern when handling component.
    Before_transporting_a_static-sensitive component place_it_in_an_anti-static_container_or_package.,
    Handle_static- sensitive components by the_edges._Avoid_touching_pins_and circuit boards.

    6. What tool is required when installing Dell readyRails? None

    . So_that_the_release_tab_is_at_the_bottom
    8. Visit_the_Dell Support website and have your_system Service Tag on hand.,
    Verify_that_system_settings_haven_t_been_modified.,.
    9. false
    10. false
    11. Module_Controllers,
    Fans_Enclosures,
    Chassis_Enclosures
    12. False
    13. True
    14. Break
    15. false
    16. Access_via_local_console_or_network_browser,
    Monitoring_and_management_control_via_LAN

    17. Flash_update_BIOS_BMC_FCB_firmware_remotely,
    Manage__build_and_maintain__multiple_PowerEdge_R_Systems
    18. Microsoft_Windows_Server_2008_R2_and_onwards
    19. Housing_a_Dell_PCI-e_x16_card,
    Housing_two_GPGPUs
    20. Intel_82576,
    Mellanox infinite card
    21. 4
    22. all of these
    23. 16
    24. 10,5,0
    25. 4 x 1400w

    only 17 Answer is wrong

    ReplyDelete
    Replies
    1. 17 is Flash bios and CLI option

      Delete
    2. Answere befores plus this on 17, 96% Thx!!

      Delete

  7. Thanks for showing us some great examples In this Blog.
    we can see the different tags that can help in different fields and people can get benefit from these tag management.
    Thanks for sharing such nice information,But we hope there are many more great example which we have.for know please visit,

    Test and Tag



    ReplyDelete
  8. Awesome, thanks guys

    ReplyDelete
  9. Lenovo RFSW1020EN-R1 Lenovo IdeaCentre Systems Hardware Service Training - Field Service - Lenovo IdeaCentre Desktop Authorization Training


    http://www.4shared.com/office/hdVKfhOEba/Lenovo_RFSW1020EN-R1_Lenovo_Id.html

    ReplyDelete
  10. Does anybody have the Storage Certification Test? I am just looking for #20, I got the rest of the answers... Select three statements that best describe Dell Lasso tool.

    ReplyDelete
    Replies
    1. what are the answers that you do have?

      Delete
    2. Please post answers

      Delete
  11. the DELL Storage Certification Test please ????

    ReplyDelete
    Replies
    1. I have a screenshot word document for the storage test where can i upload?

      Delete
    2. Select three statements that best describe Dell Lasso tool.

      ANS:1- Collected Data is Packaged,encrypted and saved as a zip file on the Management Station System. 2- Includes Company and site contact information during logs collection. 3- Dell Lasso 4.x compiles information for all the devices in the storage area Network.

      Delete
    3. Please upload to WeTransfer, that would be awesome thanks!

      Delete
    4. PLEASE!! NEED DELL STORAGE ANSWERS!!! I AM STUCK at 72%

      Delete
  12. EqualLogic and ChromeBook please ?

    ReplyDelete
    Replies
    1. EqualLogic Q&A
      The questions WILL NOT be on the same order. Ready the question carefully before answering.
      1.- PS6010 supports how many 10 Gigabit ports?
      Answer: 2
      2.- Disk zero is located where in the PS4000?
      Answer: Top Row, far left disk
      3.- What console or telnet/ssh CLI command can be run to verify a disk drive fault?
      Answer: Diag “-a d”
      4.- How is a faulty disk identify on the PS6010?
      Answer: Red LED on the lower right corner of the disk drive
      5.- How many dedicated Management ports are there on the PS6000 controller?
      Answer: 0
      6.- What is the maximum number of disk drives are supported in the PS6000?
      Answer: 8X 16X (None of these)
      7.- Within a single PS Series Group, which of the following is a correct configuration?
      Answer: All are correct configurations
      8.- What is the maximum number of disk drives are supported in the PS6500?
      Answer: 24X 16X (None of these)
      9.- PS6000 supports hot many 1 Gigabit ports?
      Answer: 4
      10.- Once the disk has been replaced, how can you determine the disk status on the array?
      Answer: By doing all of the actions listed
      11.- PS4000 supports how many 1 Gigabit ports?
      Answer: 2
      12.- How is a faulty disk identify on the PS4000?
      Answer: Red LED on the lower right corner of the disk drive

      Delete
  13. Anyone have the Dell Printers answers?

    ReplyDelete
    Replies
    1. For anyone who wants the Q & A for Dell Printers I finally passed it and am posting it here for you. xD

      1: Which of the following are characteristics of our single function portfolio products?

      Answer: Instant on, Faster processor, Larger cartridge


      2:Which of the following are characteristics of our multi-function portfolio products?

      Answer: Fast dual, All new user, more standard & max


      3: Multifunction printers include a _____. These features enable the printer to function as a ______, or ______, as well as a printer while reducing overall printing costs.

      Answer: Scanner Photo Scanner


      4: The electronic subsystem (ESS) of the laser printer includes:

      Answer: Select All Options


      5: On a laser printer, poor image quality, misfeeds and jams are most commonly related to:

      Answer: Physical Media Issues


      6: The imaging engine (subsystem) has two functions:

      Answer: True


      7: A faulty HVPS or a loose connection between the HVPS and the charge roller can manifest the same symptoms as:

      Answer: A failed charge Roller


      8: All Laser printers contain:

      Answer: All of the above


      9: Symptoms of a damaged or malfunctioning drum include:

      Answer: All of the Above


      10: Any Residual Charge on the drum surface can:

      Answer: True


      11: Failure of the fuser prevents the _____ from adhering to the media.

      Answer: Toner


      12: What does duplexing or duplex imaging enable?

      Answer: Printing on both sides of the media.


      13: Do not lift greater than 60 pounds...

      Answer:True


      14: Do not ____ the tamper proof seal on ESD...

      Answer: Break


      15 Parts that are returned to Dell should be repackaged in the same manner in which they were received.

      Answer: True


      16 Dell workgroup laser printers have which two diagnostic modes:

      Answer: Customer mode, Developer/Customer Engineer


      17 WHat Checks the built-in firmware tests on Dell workgroup laser printers?

      Answer: None of the above


      18 Which components need to be installed in order for the manual feed test to be executed?

      Answer: Components of the media path


      19 When a printer is plagued with misfeeds and jams ther media needs to be checked for:

      Answer: Media size, Moisture, Damage and that it lays fleet in the tray


      20 Cleaning a laser printer should be a part of your routine maintenance schedule because accumulated toner can:

      Answer: Adhere the media to rollers or cause rollers to fail, Land on the media as it progresses through the path


      21 Worn or dirty rollers may not be able to move media through the feed path... True


      22 When an image quality is completely or partially black output, what you have to do?

      Answer: Check the printer cartridges, Enable the change all colors to black text smoothing


      23 Noise issues can be generated from any moving parts such as:

      Answer: All of the above

      Delete
  14. Q-Both the Latitude XFR and ATG Notebook are equipped with (select all that apply)
    - Hot-swappable media modules
    - Reinforced HD display
    - Liquid cooled processor
    - Dustproof keyboards


    The answer is ? Help me please

    ReplyDelete
  15. Foundation 2013 powervault please!!!

    ReplyDelete
  16. Dell Foundation Training for PowerVault Storage Solutions and Dell Training for Networking PLEASE!!! I AM STUCK.

    ReplyDelete
    Replies
    1. Answers:
      1 Combines All of These
      2 Chain & Ring
      3 follow orden up to down: Green,Brown,Red,Grey
      4 IP http port
      5 iSCSI Session Details, Ability to assign queue iSCSI Flow, Identification of iSCSI Session Termination
      6 Global Configuraiton Mode, Privileded EXEC Mode, User EXEC Mode
      7 Copy run start
      8 FA=Fastethernet, GI=Gigabitethernet, TE=tengigabitethernet, LO=loopback
      9 Login Configuration,E-mail alerting,SNMP configuration & Configuration and image files
      10 On-Flash log, Email Notifications, SMTP Traps
      11 True
      12 Dell OpenManage Network Manager
      13 Dell W-series
      14 Portscan , ports & Managed Resources
      Running-config & Startup-config
      15 TFTP server & USB drive
      16 Synchronizes - Stack Master
      17 Check the power coming to the PSU,Check the LED status of the PSU, at least replace PSU after all the steps fails
      18 follow order up to down: Cable,SPF Transceiver,Expansion Module, Port
      19 <Esc? once
      20 If a stack member with the same unit ID replaces.., The entire networks may be affected when a topology... You can insert and remove switches to/from the current stack.....
      21 False
      22 Reseat or replace cables,reseat or replace module cards, verify matching transceivers
      23 Privileged EXEC Mode, Global Configuration Mode, User EXEC Mode


      Good Luck.

      Delete
    2. #10 is wrong, asks to choose 3, unsure which is correct answer, but i did pass with this list thanks

      Delete
    3. 10. E-mail alerting, Configuration and image files, SNMP......

      Delete
    4. Q10 above in first post is actually Q11 in my test.
      Q12 in my test Q13 Dell Airwave Management Suite
      After Q14 above the next answer is Q16 in my test running config and startup - config
      Q16 above was Q18 in my test
      Q23 two stacks units have the same unit number.....is True
      Q22 above was 24 in my test
      Q25 parts returned to Dell should be repackage.. is True

      passed with 92%

      anonimo from Florida

      Delete
  17. Looking for complete EqualLogic.
    if any one have the answers.
    Thank you

    ReplyDelete
  18. Dell foundation for powervault storage solutions please

    ReplyDelete
  19. Hello,
    Nice representation as always.. I love your post.. This post gives so many informative information regarding dell poweredge ...

    ReplyDelete
  20. equallogic questions
    faulty disk identify ps6010
    red led lower right

    6500 total drives
    48

    disk 0 ps4000
    top row, far left

    once disk replaced, determine status
    by doing all actions

    within a single PS series group, which correct config
    all are correct configs

    ps4000 supports how many gigabit ports
    2

    ps6000 how many gigabit ports
    4

    ps6010 10gig ports
    2

    console or telnet ssh/cli command verify drive fault
    dia "-a d"

    management ports on a ps6000
    none

    max number drives ps6000
    16

    Faulty disk ps4000
    red led lower right corner

    ReplyDelete
  21. Does anyone have the answers for the DELL laptop certification?

    ReplyDelete

  22. Good post....thanks for sharing.Do you need cash loan against credit card?.Kindly see my blog

    123.hp.com

    ReplyDelete
  23. Hello
    Can someone help me with the DES-1D11?

    ReplyDelete